Laserschweißen

Unser Leistungsangebot

Die Forschung und Entwicklung im Bereich Laserschweißen konzentriert sich vor allem auf die Ausdehnung aktueller Verfahrensgrenzen, wie der Steigerung der Bearbeitungsgeschwindigkeit und der Schweißnahtqualität. Hierzu entwickelt das Fraunhofer ILT prozessspezifische Optiken, Düsen und Kontrollsysteme. Mit gezielter Strahlformung und prozessangepassten Steuerungen werden hohe Genauigkeiten und Qualitäten bei Schweißnähten erzielt. Gleichzeitig eignen sich die Prozesse für schwer zu bearbeitende Materialen wie ultrahochfeste Stähle, hochfeste Aluminiumlegierungen oder Verbundmaterialien. Im Fokus stehen auch integrierte Anwendungen, die Schneiden, Schweißen und additive Verfahren kombinieren und somit sehr wirtschaftlich sind.

Besonders anspruchsvolle Anwendungen sind beispielsweise das Schweißen von Superlegierungen in der Energiewirtschaft und das Höchstleistungsschweißen für den Offshore-Bereich. Hierzu entwickelt das Fraunhofer ILT extrem robuste Strahlführungen und Bearbeitungsköpfe, die sich auch für die Stahl- und Aluminiumindustrie, für den Schiff- und Schwermaschinenbau sowie für den Fahrzeugbau und die Luftfahrtindustrie eignen.

Das Leistungsangebot umfasst marktnahe FuE-Dienstleistungen in allen Bereichen der Prozessketten, die laserbasierte Schweiß- und Schneideprozesse nutzen. So unterstützt das Fraunhofer ILT Kunden bei der Konzeption und Entwicklung industrienaher Verfahren oder Komponenten, mit Dienstleitungen im Bereich Design und Simulation sowie bei Markt-und Machbarkeitsstudien.

 Hybridschweißen eines Rechteckträgers für ein Baufahrzeug.
© Fraunhofer ILT, Aachen.
Hybridschweißen eines Rechteckträgers für ein Baufahrzeug.
Schweißnaht in S500MC/DP980 nach Knick-Biegebelastung im Umformwerkzeug.
© Fraunhofer ILT, Aachen.
Schweißnaht in S500MC/DP980 nach Knick-Biegebelastung im Umformwerkzeug.
Trommel aus AlMg5 (3.3555), Wandstärke 11,5 mm.
© Fraunhofer ILT, Aachen.
Trommel aus AlMg5 (3.3555), Wandstärke 11,5 mm.

Schmelzschweißen metallischer Werkstoffe

  • Dioden-, Faser-, Scheiben-, und CO2-Laser
  • Hybride und kombinierte Prozesse
  • Schweißmetallurgie
  • Strahl-Stoff-Wechselwirkung
  • Verfahrensintegration

Werkstoffe

  • Stähle und Nickelbasislegierungen
  • Aluminium- und Titanlegierungen
  • Kupfer, Platin, Refraktärmetalle
  • Intermetallische Werkstoffe
  • Artungleiche Verbindungen

Prozessprüfung

  • Schweißbarkeit
  • Fehler- und Schadensanalyse
  • Prüfung von Komponenten und Systemen

Anwendungen

  • Industriedienstleistungen
  • Werkzeugentwicklung und -erprobung
  • Vorserienfertigung

Beratung

  • Werkstofftechnik
  • Prozess- und Anwendungstechnik
  • Lasergerechte Konstruktion
  • Komponenten und Systeme

Broschüren und Flyer

Unsere Broschüren vermitteln einen schnellen Einblick in unsere Leistungsangebote. Detaillierte Informationen und einzelne Projektergebnisse finden Sie auch im Reiter »Projektergebnisse«.

 

»Laserbearbeitungsverfahren für Faserverbundkunststoffe«

 

»Laserstrahlschweißen metallischer Werkstoffe«

Studie

Licht als Schlüssel zur globalen ökologischen Nachhaltigkeit

Branchen

Lasertechnik trägt in unterschiedlichen Branchen zur Lösung anspruchsvoller Aufgabenstellungen bei. Ob als Werkzeug in der Automobilfertigung, als Messmittel im Umweltbereich, als Diagnose- oder Therapieinstrument in der Medizintechnik oder als Kommunikationsmedium in der Raumfahrttechnik, der Laser bietet vielfache Einsatzmöglichkeiten mit hoher Produktivität und hoher Effizienz.

Auf den Branchen-Webseiten finden Sie weitere Informationen und eine Auswahl aus unserem Angebot.

 

Forschen Sie mit uns!

Bei Fragen zu übergreifenden Themen nehmen Sie einfach Kontakt mit uns auf! Unsere Ansprechpartner stehen Ihnen gerne zur Verfügung.

Publikationen

Dahmen, M., Lindner, S., Monfort, D., Petring, D.:
High-manganese steel dissimilar joints by laser beam welding – Metallurgy and properties.
Proceedings of the 5th International Conference on Steel in Cars and Trucks, June 18 - 22, 2017, Noordwijkerhout, Nederland, (9 S.) (2017)

Schöler, C., Haeusler, A., Karyofylli, V., Behr, M., Schulz, W.,  Gillner, A., Niessen, M.:
Hybrid simulation of laser deep penetration welding.
Materials Science & Engineering Technology 48 (12), 1290-1297 (2017)

Häusler, A., Schürmann, A., Schöler, C., Olowinsky, A., Gillner, A.,  Poprawe, R.:
Quality improvement of copper welds by laser microwelding with the usage of spatial
power modulation. JLA 29 022422 (7 S.) (2017)

Olschok, S., Reisgen, U., Gach, S., Arntz, D.:
Residual stress reduction in carbon manganese steels using low-transformation-temperature (LLT) filler materials – in situ diagnostics with digital image correlation
36th Int. Congr. on Applications of Lasers & Electro-Optics, ICALEO, Oct. 22—26, 2017, Atlanta, GA USA. Paper 1001, (9 S.) (2017)

Schöler, C., Nießen, M., Jansen, U., Schulz, W.:
A fast method for automated calibration of heat sources.
11. International Seminar ‘Numerical Analysis of Weldability’, Sept. 27 to 30, 2015, Schloss Seggau near Graz, Austria.
In: Sommitsch, Christof [u.a.] (Hrsg.): Mathematical Modelling of Weld Phenomena 11, pp. 595-612 (2016)
ISBN 978-3-85125-490-7

Dahmen, M., Janzen, V., Lindner, S., Monfort, D., Wagener, R.:
Laserstrahlschweißen ultrahochfester Stähle - Stand und Perspektiven
DVS Congress - Große Schweißtechnische Tagung,
Leipzig , Germany 19.09.2016 - 20.09.2016. pp. 221-230 (2016)

Dahmen, M., Göbel, M.:
Mechanical properties and fracture behaviour of LMD produced 2.4682 and wrought 2.4630 dissimilar welds
Physics Procedia  83, 426-436 (2016)

Dahmen, M., Lindner, S., Monfort, D., Petring, D.:
Weld metallurgy and mechanical properties of high manganese ultra-high strength steel dissimilar welds
Physics Procedia 83, 344-351 (2016)

Schöler, C., Nießen, M., Jansen, U., Schulz, W.:
A fast method for automated calibration of heat sources
11. International Seminar ‘Numerical Analysis of Weldability’, Sept. 27 to 30, 2015, Schloss Seggau near Graz, Austria. In: Sommitsch, Christof [u.a.] (Hrsg.): Mathematical Modelling of Weld Phenomena 11. pp. 595-612 (2016) ISBN 978-3-85125-490-7

Dahmen, M., Janzen, V., Lindner, S., Wagener, R.:
Mechanical properties of laser beam welded ultra-high strength chromium steel with martensitic microstructure
Phys. Proced. 78, 210-221 (2015)

Dahmen, M., Rajendran, K. D., Lindner, S.:
Sensitization of laser-beam welded martensitic stainless steels
Phys. Proced. 78, 240-246 (2015)

Janzen, V., Meschut, G., Dahmen, M., Poprawe, R., Lindner, S., Wagener, R., Melz, T.:
Investigation on joint characteristics of laser beam welded press hardenable ultra-high strength steels with ferritic-martensitic and martensitic microstructure
Welding in the World (Online First) (10 S.) (2015)

Powell, J., Ilar, T., Frostevarg, J., Torkamany, M. J., Na, S.-J., Petring, D., Zhang, L., Kaplan, A. F. H.:
Weld root instabilities in fiber laser welding
Journal of Laser Applications 27 (S2), S29008 (5 S.) (2015)

Dahmen, M., Daamen, M., Janzen, V., Lindner, S., Schneider, A., Wagener, R.:
Laser beam welding of new ultra-high strength and supra-ductile steels
SCT14 Future trends in steel development, processing technologies and applications, Hrsg. H.-J. Wieland, S. Brockmann,
Düsseldorf: Verl. Stahleisen (2014). pp. 282-289

Powell, J., Illar, T., Frostevarg, J., Torkamany, M. J., Na, S., Petring, D., Zhang, L., Kaplan, A. F. H.:
Weld root instabilities in fiber laser welding
Proceedings 33rd Int. Congress on Applications of Lasers & Electro-Optics (ICALEO), October 19-23, 2014, San Diego/Ca., USA. Paper 1601, 753-758 (2014) ISBN 9781940168029

Aden, M., Otto, G., Duve, C.:
Irradiation strategy for laser transmission welding of thermoplastics using high brilliance laser source
Int. Polymer Processing 28 (3), 300-305 (2013)

Liu, J., Dahmen, M., Ventzke, V., Kashaev, N., Poprawe, R.:
The effect of heat treatment on crack control and grain refinement in laser beam welded β-solidifying TiAl-based alloy
Intermetallics 40
65-70 (2013)

Mehlmann, B., Olowinsky, A., Thuilot, M., Gillner, A.:
Spatially modulated laser beam micro welding of CuSn6 and nickel-plated DC04 steel for battery applications
Proc. of Lamp2013 - the 6th Int. Congr. on Laser Advanced Materials Processing (7 S.) (2013)

Berlin, M., Rösner, A., Schneider, F.:
Laser radiation as all-round tool for composite parts
Kunststoffe 102, Nr. 5, 20-23 (2012)

Kaierle, S., Dahmen, M., Güdükkurt, O.:
Eco-efficiency of laser welding applications
Proc. SPIE 8065, 80650T, (10 S.) (2011)

Petring, D., Schneider, F., Dickler, H.:
Drei in einem Kopf 
Laser Technik J. 8, Nr. 4, 28-32, (2011)

Petring, D., Nazery Goneghany, V.:
Parameter dependencies of copper welding with multi-kW lasers at 1micron wavelength 
Phys. Proced. 12, 95-104, (2011)

Dahmen, M., Güdükkurt, O., Kaierle, S.:
The ecological footprint of laser beam welding
Physics Procedia 5, Nr 2, 19-28, (2010)

Kaierle, S.:
Der ökologische Fußabdruck des Laserstrahlschweißens
Laser Magazin Nr 4, 6-7, (2010)

Petring, D.:
Enhancing laser welding capabilities by hybridisation or combination with other processes
In: Advances in laser materials processing. Ed. by J.Lawrence, J. Pou, D. K. Y. Low and E. Toyserkani. Boca Raton: CRC Pr. 2010. ISBN 9781420094923. pp. 261-287, (2010)

Petring, D.:
More productivity, flexibility as well as energy efficiency in laser cutting and welding
AKL'10 - International Laser Technology Congress, Aachen, (37 S.) (2010)

Petring, D., Schneider, F., Dickler, H.:
Progress in cutting and welding of sheet metal assemblies in one machine with the laser combi-head
PICALO 2010, March 23-25, 2010. 4th Pacific International Conference on Applications of Lasers and Optics. Wuhan, Peoples Republic of China. Paper 1001, (2010)

Dahmen, M., Drenker, A., Ungers, M., Pfeiffer, S., Kaierle, S.:
Detection of phase boundaries and defect detection in CO2-laser beam welding
Proc. of LAMP 2009 - the 5th Congress on Laser Advanced Materials Processing,Kobe, Japan, (5 S.) (2009)

Petring, D., F. Schneider, N. Wolf, V. Nazery Goneghany:
How beam quality, power and wavelength influence laser cutting and welding processes
Proc. of LAMP 2009 - 5th Int. Congr. on Laser Advanced Materials Processing, Kobe, Japan, (8 S.) (2009)

Kristensen, J. K., Webster, S., Petring, D.:
Hybrid laser welding of thick section steels -the HYBLAS Project
NOLAMP 12. 12th Nordic Conference in Laser Processing of Materials, Copenhagen, Lyngby, Denmark: ATV-SEMAPP/The Technical University of Denmark, (18 S.) (2009)

Petring, D., Schneider, F.:
One machine does it all for laser beam welding and cutting
Welding J. March, 38-41, (2009)

Dahmen, M., Kaierle, S.:
The ecological footprint of laser beam welding
Proc. of LAMP 2009 - the 5th Int. Congr. on Laser Advanced Materials Processing,  Kobe, Japan, (4 S.) (2009)

Schneider, F., Petring, D., Nazery, V., Nuesser, C.:
2D and 3D laser cutting and welding with the combi-head: Efficient production by flexible process changes
Proc. 5th Int. Conf. WLT-Conf. on Lasers in Manufacturing 2009, Munich, Ed. by A. Ostendorf [u.a.] Stuttgart: AT-Fachverlag,
pp. 245-249, (2009)

Petring, D. u.a.:
3D-Laserschneiden und -schweißen in einer Maschine
MM MaschinenMarkt Nr. 23, 20-23, (2009)

Dahmen, M., Kaierle, S., Aiping, W., Wenjin, L., Yi, S., Hequiang, W.:
Comparative study of techniques for wear minimisation of engine parts
Proc. of the 3rd Pacific Int. Conf. on Application of Lasers and Optics (PICALO) 2008, Beijing, 6 S., (2008)

Petring, D.:
Enhanced capabilities of laser welding by hybridization and combination techniques
Proc. of the 70th Laser Materials Processing Conference, Japan Laser Processing Society JLPS, Osaka, Japan, Keynote paper, 7-12, (2008)

Petring, D.:
Enhanced capabilities of laser welding by hybridization and combination techniques
The Laser User, Issue 52, 36-39, (2008)

Petring, D.:
Enhancement of laser welding capabilities by hybridization or combination of different processes
Proc. of the 3rd Pacific Int. Conf. on Applications of Lasers and Optics 2008, PICALO, Beijing, China, Paper 705, 324-329, (2008)

Schneider, F., Petring, D.:
Flexible 3-D – laser cutting and welding with the combi-head
Proc. of the 27th Int. Congress on Applications of Lasers & Electro-Optics 2008, ICALEO, Temecula, CA, USA, Laser Materials Processing Conference, Paper 1305, 582-588, (2008)

Webster, S., Klaestrup-Kristensen, J., Petring, D.:
Hybrid laser welding of thick section steels
Proc. of the IIW Int. Conf. “Safety and Reliability of Welded Components in Energy and Processing Industry”, Graz, Austria, (15 S.) (2008)

Petring, D., Schneider, F., Wolf, N., Nazery, V.:
The relevance of brightness for high power laser cutting and welding
Proc. of the 27th Int. Congress on Applications of Lasers & Electro-Optics 2008, ICALEO, Temecula, CA, USA, October 20-23, 2008
Laser Materials Processing Conference, Paper 206, 95-103, (2008)

Gedicke, J., Olowinsky, A., Jansen, U., Schulz, W., Gillner, A.:
Weld depth control in fiber laser welding of thin metal sheets 
Proc. of the 27th Int. Congress on Applications of Lasers & Electro-Optics 2008, ICALEO, Temecula, CA, USA, (2008)

Kaierle, S., Fiedler, W., Regaard, B., Dahmen, M.:
Anwendung brillianter Diodenlaser beim Schweißen von Aluminium-Dünnblechen
Laser Technik Journal 2, 35-38, (2007)

Kaierle, S., Dahmen, M., Mann, S., Poprawe, R.:
Autonomous Production Cell for Laser Beam Welding
Proc. Int. Conf. on Competitive Manufacturing "COMA 07", Stellenbosch, Südafrika, 6 S., (2007)

Dahmen, M., Fiedler, W., Regaard, B., Kaierle S.:
Continuous process control during laser beam welding of small section Aluminium sheet
Proc. of WLT Conf. Lasers in Manufacturing, Munich, 5 S., (2007)

Petring, D.:
Integriertes Laserstrahlschneiden und -schweißen: Reduzierung von Nebenzeiten und Systemaufwand
EALA 2007, Bad Nauheim, (15 S.) (2007)

Petring, D., Dickler, H.:
Multifunktionaler Laserbearbeitungskopf 
MM Maschinenmarkt 22, 34-36, (2007)

Petring, D., Dickler, H.:
Nebenzeiten senken und Flexibilität steigern
Technica 56, Nr 06/07, 72-74, (2007)

Albus, P., Boglea, A., Burbaum, B., Holtkamp, J., Kelbassa, I., Nazery-Goneghany, V., Olowinsky, A., Petring, D., Poggel, M., Schmitt, F., Schneider, F., Wolf, N., Poprawe, R.:
Neue Schweißtechnologien mit neuen Lasern
Proc. of 10th International Aachen Welding Conference iASTK´07
229-242, (2007)

Fiedler, W., Dahmen, M., Kaierle, S.:
Process control of laser beam welded small section aluminum sheets
Proc. of ICALEO 2007, Orlando, Fl., 271-276, (2007)

Petring, D., Fuhrmann, C., Wolf, N., Poprawe, R.:
Progress in Laser-MAG hybrid welding of high-strength steels up to 30 mm thickness
Proc. of 26th Int. Congress on Applications of Lasers & Electro-Optics ICALEO, October 29 - November 1, 2007, Orlando, Fl.
300-307, (2007)

 

Unsere Leistungsangebote decken ein weites Themenspektrum ab. Verwandte Themen zum Laserschweißen und weitere Schwerpunkte aus Forschung und Entwicklung finden Sie unter den folgenden Links.